THE FUTURE OF SMALL SCALE WIND GENERATION IS HERE
Discover the future of Wind Turbines with SOMA
SERVICES
We Deliver Exceptional Products and Services Around the World
PERFORMANCE
Large rotor diameters ensure high efficiency in light to moderate wind speeds. The brushless, permanent magnet alternators used on all Soma machines are designed to produce a power curve that matches the output of the 2 bladed rotor while operating at optimal tip speed ratios.
FEATHERING
MECHANISM
The tilt back action relieves pressure on the wind generator and tower in strong winds. This is a fail-safe design with mechanical simplicity. A hydraulic dampener limits the feathering action in gusty wind conditions.
CHARGE
CONTROLLER
Soma wind turbine is supplied complete with a voltage regulated charge controller and dump load. If using wind turbine to charge batteries, excess power is burnt off as heat when the batteries are fully charged. The Soma 1Kw features a tapered charge regulator which progressively reduces the supply of current to the battery as it reaches full charge. By adjusting the control dial the upper voltage can be reset to enable equalization charging.
SOMA 1kW
APPLICATIONS
Enough power for lights, radio, television, fan, water pump, kitchen appliances, microwave oven, washing machine, high efficiency DC refrigeration, power tools and more, depending on the average wind speed. The ideal source of power for telecommunications and scientific equipment.
TECHNICAL SPECIFICATIONS
Electrical Characteristics
Rated output
Peak output
Cut in wind speed
Rated wind speed
Max design wind speed
Feathering mechanism
Rotor diameter
Number of blades
Operating speeds
Blade construction
Alternator type
Voltage
Controller
​
​
Shipping Volume
Shipping weight
1000 watts
1200 watts
3.5 m/s
10 m/s
50 m/s
Tilt-up
2.7 m
2 blades
250 - 300 rpm
GRP
Permanent magnet 3 phase
48V Off-Grid / 230V On-Grid
MPPT 48V Off-Grid / Voltsys+ABB On-Grid
​
​
0.15m³
50 kg
Mechanical Characteristics
ENERGY OUTPUTS
Average Wind Speed (metres/sec)
Average Daily Output (kiloWatt-hours)
3 m/s
4 m/s
5 m/s
6 m/s
7 m/s
8 m/s
9 m/s
10 m/s
0.9 kWh
2.8 kWh
4.0 kWh
7.3 kWh
10.0 kWh
12.0 kWh
14.2 kWh
16.3 kWh
Rated instantaneous output is 1000Watt at 10m/s. Peak output is 1200Watt at 15m/s
AWS Towers
AWS Towers are designed and manufactured in Melbourne, Australia.
Uses:
Antenna tower, Radio tower, Wind turbine tower, Instrument tower, etc.
Description:
Tilt Lattice tower is heavy duty, hot dipped galvanised to 85 Microns. Comes in 3 meter sections and cage footing. Australian Standards certified and Designed, certified and MADE in Victoria. For use with Wind Turbines, Antennas, Radio equipment, Microwave dishes, Monitoring equipment, other.
Sizing Options:
9 Meter and footing and lift pole $4,900 + GST
12 Meter and footing and lift pole $5,900 + GST
18 Meter and footing and lift pole + Stay wire Kit and anchors $8,900 + GST
Add stay wire kit and anchors to all towers (recommended for Dynamic loads such as wind turbines) $1,500 + GST
Jack hammer attachment for stay wires kits $330 + GST
​
Shipping not included.
Installation not included.
Contact Us for shipping estimate.
